365bet集卡

[1]姚志华,李德战,付庆海,等.偏心亚半球成型装药结构的数值模拟[J].365bet集卡_365bet体育在线手机投注_365bet体育手机投注,2013,42(02):17-20.[doi:10.3969/j.issn.1001-8352.2013.02.005]
 YAO Zhihua,LI Dezhan,FU Qinghai,et al.Numerical Simulation of Shape Charge with an Eccentric Subhemisphere Liner[J].EXPLOSIVE MATERIALS,2013,42(02):17-20.[doi:10.3969/j.issn.1001-8352.2013.02.005]
点击复制

偏心亚半球成型装药结构的数值模拟()
分享到:

《365bet集卡_365bet体育在线手机投注_365bet体育手机投注》[ISSN:1001-8352/CN:32-1163/TJ]

卷:
42
期数:
2013年02
页码:
17-20
栏目:
基础理论
出版日期:
2013-04-20

文章信息/Info

Title:
Numerical Simulation of Shape Charge with an Eccentric Subhemisphere Liner
文章编号:
4565
作者:
姚志华李德战付庆海吴川
空军场务技术试验中心(山东济宁,272000)
Author(s):
YAO Zhihua LI Dezhan FU Qinghai WU Chuan
Airfeild Technology Test Center of Airforce (Shandong Ji’ning, 272000)
关键词:
爆炸力学偏心亚半球射流数值模拟
Keywords:
explosion mechanics eccentric sub-hemisphere jet numerical simulation
分类号:
TP69 O383
DOI:
10.3969/j.issn.1001-8352.2013.02.005
文献标志码:
A
摘要:
为研究起爆方式、药型罩的高度和曲率半径对偏心亚半球装药形成射流的影响,利用LS—DYNA有限元分析软件对偏心亚半球装药结构射流形成过程进行数值模拟,分析了其成型过程。研究表明:对于偏心亚半球装药结构,端面环起爆形成的爆轰波形和药型罩外形匹配较好。药型罩的高度和口径比值H/A<0.2时,形成爆炸成形弹丸;H/A≥0.2时,形成杆式侵彻体。H/A值越大,弹体越细长,头尾速度差越大,有分裂成高速射流和低速杵体的趋势。曲率半径和口径比值R/A≥1.5时,形成的射流具有较好的外形和较高的速度。
Abstract:
In order to study the effect of initiation methods, heights and radius of liner on the formation of jet, LS-DYNA software was used to numerically simulate and analyze the formation process of jet in this paper. The research shows that, for the eccentric sub-hemisphere charge structure, it proved to be better when the shape of detonation wave under annular initiation matches the outside shape of the liner. The linear forms the explosively formed projectile, when the ratio between height and diameter (H/A)<0.2. The linear forms the rod projectile, when the ratio H/A≥0.2.The greater H/A value, the more slender the projectile body could be, and the greater the speed difference between the head jet and the tail jet comes to be. There is the trend that the linear forms the high-speed jet and the low speed slug. The formed jet has the good shape and high speed, when the ratio between radius and diameter (R/A)≥1.5.

参考文献/References:

[1]王志军,吴国东.一种新型星锥状药型罩形成射流的数值模拟[J].兵工学报,2007,28(11):1397-1400.
Wang Zhijun ,Wu Guodong. Numerical simulation on jet formation of a new star shaped liner [J]. Acta Armamentarii, 2007,28(11):1397-1400.
[2]范晨阳,王志军,吴国东.星锥状药型罩形成射流侵彻混凝土的数值模拟[J].弹箭与制导学报,2010,30(3):99-102.
 Fan Chenyang, Wang Zhijun, Wu Guodong .Numerical simulation on jet formation and projectile into concrete target of a new star shaped liner[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2010,30(3):99-102.
[3]李成兵,裴明敬,沈兆武. 高速杆式弹丸三维数值模拟[J].高压物理学报,2007,21(2): 165-172.
 Li Chengbing, Pei Mingjing, Shen Zhaowu. Threedimensional numerical simulation of the high velocity rodshaped projectile [J]. Chinese Journal of High Pressure Physics, 2007,21(2):165-172.
[4]Fred I, Stanley G, Golaski K. Hydrocode computations and experimented investigations of explosive staged shaped charge devices, AD-A109714[R]. US: AD, 1981.
[5]张雷雷,朱鸿瑞,黄风雷. 大锥角药型罩聚能装药结构对混凝土介质侵彻研究[J].弹箭与制导学报,2007,27(3): 134-146.
 Zhang Leilei, Zhu Hongrui, Huang Fenglei. Shaped charge with large cone angle penetration to concrete target [J]. Journal of Projectiles, Rockets, Missiles and Guidance,2007,27(3):134-146.
[6]吴晗玲,段卓平,汪永庆. 杆式射流形成的数值模拟研究[J].爆炸与冲击,2006,26(4):328-332.
 Wu Hanling, Duan Zhuoping, Wang Yongqing. Simulation investigation of rodlike jets [J]. Explosion and Shock Waves. 2006,26(4):328-332.
[7]曹德青,恽寿榕,丁刚毅,等. 用ALE方法实现射流侵彻靶板的三维数值模拟[J].北京理工大学学报,2000,20(2):171-173.
 Cao Deqing, Yun Shourong, Ding Gangyi, et al. 3D Numerical simulation of jet penetrate target using ale method [J]. Transactions of Beijing Institute of Technology. 2000, 20(2):171-173.
[8]段卓平,张震宇. 杆式射流形成的初步研究[J].弹箭与制导学报,2004 ,24(4):308-310.
Duan Zhuoping, Zhang Zhenyu. Elementary study of the rodliked jet formation[J]. Journal of Projectiles , Rockets, Missiles and Guidance, 2004,24(4):308-310.
[9]时党勇,李裕春,张胜民. 基于ANSYS/LSDYNA 8.1 进行显示动力分析[M]. 北京:清华大学出版社,2005:282-297.
 Shi Dangyong, Li Yuchun, Zhang Shengmin. Explicit dynamic analysis using ANSYS/LSDYNA 8.1 [M]. Beijing: Qinghua University Press,2005:282-297. 
[10]张会锁,赵扞东,黄延平,等. 起爆方式对聚能射流影响的数值仿真研究[J].含能材料,2008,16(4):415-419.
Zhang Huisuo, Zhao Handong, Huang Yanping, et al. Numerical simulation of effect of ignition ways on shaped charge jet[J].Chinese Journal of Energetic Materials,2008,16(4):415-419.
[11]成风生,宋浦,顾晓辉,等.TNT装药爆炸波在刚性平面上方传播反射的数值研究[J].365bet集卡_365bet体育在线手机投注_365bet体育手机投注,2011,40(4):1-4.
Cheng Fengsheng, Song Pu, Gu Xiaohui, et al. Numerical investigation into the propagation and Reflection of TNT blast wave above rigid ptane[J].Explosive Material,2011,40(4):1-4.

相似文献/References:

[1]安二峰,杨军,陈鹏万.高锰钢整铸辙叉爆炸硬化实践与研究[J].365bet集卡_365bet体育在线手机投注_365bet体育手机投注,2009,38(02):25.
 AN Erfeng,YANG Jun,CHEN Pengwan.Study on Explosive Hardening of Hadfield Steel Rail Frogs[J].EXPLOSIVE MATERIALS,2009,38(02):25.
[2]徐森①,张兴明①,潘峰①,等.工业炸药能量测试方法的分析[J].365bet集卡_365bet体育在线手机投注_365bet体育手机投注,2013,42(01):18.[doi:10.3969/j.issn.1001-8352.2013.01.005]
 XU Sen,ZHANG Xingming,PAN Feng,et al.Analysis on the Energy Testing Methods of Industrial Explosives[J].EXPLOSIVE MATERIALS,2013,42(02):18.[doi:10.3969/j.issn.1001-8352.2013.01.005]
[3]臧立伟,尹建平,王志军.轴向预制破片战斗部的设计研究[J].365bet集卡_365bet体育在线手机投注_365bet体育手机投注,2013,42(02):5.[doi:10.3969/j.issn.1001-8352.2013.02.002]
 ZANG liwei,YIN Jianping,WANG Zhijun.Optimizing Design of Axial Prefabricated Fragments[J].EXPLOSIVE MATERIALS,2013,42(02):5.[doi:10.3969/j.issn.1001-8352.2013.02.002]
[4]杨亚东,李向东,王晓鸣.爆炸冲击波空中传播特征参量的优化拟合[J].365bet集卡_365bet体育在线手机投注_365bet体育手机投注,2014,43(01):13.[doi:10.3969/j.issn.1001-8352.2014.01.003]
 YANG Yadong,LI Xiangdong,WANG Xiaoming.Optimum Fitting for Characteristic Parameters of Blast Shockwaves Traveling in Air[J].EXPLOSIVE MATERIALS,2014,43(02):13.[doi:10.3969/j.issn.1001-8352.2014.01.003]
[5]金朋刚,郭炜,任松涛,等.TNT密闭环境中能量释放特性研究[J].365bet集卡_365bet体育在线手机投注_365bet体育手机投注,2014,43(02):10.[doi:10.3969/j.issn.1001-8352.2014.02.003]
 JIN Penggang,GUO Wei,REN Songtao,et al.Research on TNT Energy Release Characteristics in Enclosed Condition[J].EXPLOSIVE MATERIALS,2014,43(02):10.[doi:10.3969/j.issn.1001-8352.2014.02.003]
[6]冯海云,胡宏伟,赵向军,等.一种评估炸药作功能力的新测试方法[J].365bet集卡_365bet体育在线手机投注_365bet体育手机投注,2014,43(02):33.[doi:10.3969/j.issn.1001-8352.2014.02.008]
 FENG Haiyun,HU Hongwei,ZHAO Xiangjun,et al.A New Test Method to Assess the Acting Ability of Explosive[J].EXPLOSIVE MATERIALS,2014,43(02):33.[doi:10.3969/j.issn.1001-8352.2014.02.008]
[7]郑思友,翟廷海,夏斌.工业雷管抗弯性能试验装置与方法设计[J].365bet集卡_365bet体育在线手机投注_365bet体育手机投注,2014,43(03):33.[doi:10.3969/j.issn.1001-8352.2014.03.008]
 ZHENG Siyou,ZHAI Tinghai,XIA Bin.Testing System and Method Design of the Bending Resistance of Industrial Detonator[J].EXPLOSIVE MATERIALS,2014,43(02):33.[doi:10.3969/j.issn.1001-8352.2014.03.008]
[8]杨斐,王建灵,罗一鸣,等.DNTF/AP/Al体系炸药的能量特性分析[J].365bet集卡_365bet体育在线手机投注_365bet体育手机投注,2014,43(05):11.[doi:10.3969/j.issn.1001-8352.2014.05.003]
 YANG Fei,WANG Jianling,LUO Yiming,et al.Explosion Energy Characteristics of DNTF/AP/Al Explosive[J].EXPLOSIVE MATERIALS,2014,43(02):11.[doi:10.3969/j.issn.1001-8352.2014.05.003]
[9]沈飞,王辉,余然,等.两种含铝炸药水中近场冲击波传播规律研究[J].365bet集卡_365bet体育在线手机投注_365bet体育手机投注,2014,43(05):26.[doi:10.3969/j.issn.1001-8352.2014.05.006]
 SHEN Fei,WANG Hui,YU Ran,et al.Propagation Characteristics of Close-field Shock Wave for Two Aluminized Explosives by Underwater Explosion[J].EXPLOSIVE MATERIALS,2014,43(02):26.[doi:10.3969/j.issn.1001-8352.2014.05.006]
[10]李清,杨阳,杨仁树,等.基于MAT96本构模型的钢筋混凝土结构爆破拆除数值模拟[J].365bet集卡_365bet体育在线手机投注_365bet体育手机投注,2015,44(01):41.[doi:10.3969/j.issn.1001-8352.2015.01.010]
 LI Qing,YANG Yang,YANG Renshu,et al.The Numerical Simulation of Reinforced Concrete Structure Blasting Based on MAT96 Constitutive Model[J].EXPLOSIVE MATERIALS,2015,44(02):41.[doi:10.3969/j.issn.1001-8352.2015.01.010]

备注/Memo

备注/Memo:
收稿日期:2012-09-13
作者简介:姚志华(1984~),男,硕士,工程师,研究方向:弹箭仿真技术。
更新日期/Last Update: 2013-04-27